Thorens Td202 Turntable Walnut

Key Features:

The Thorens 202 is a fully manual premium turntable from Thorens. With a die cast aluminum platter, a built in phono stage and electronic speed switching.

Setup is easy and quick so you can start playing your records right away. It also comes with the high quality Audio Technica 95E stylus preinstalled.

SPECIFICATIONS...

• Turntable:
  • Drive System: Belt Drive
  • Motor: DC Motor
  • Speed: 33 1/3 RPM, 45 RPM
  • Rotation Speed Variation: +/–2%
  • Wow and Flutter: 0.2%
  • Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF); 60dB or higher (unweighted, 20kHz LPF)
  • Platter: Aluminum Die-cast
  • Diameter of Platter: 12″ / 300mm
• Tonearm:
  • Type: Alumi tube, Static Balance, Straight
  • Effective Arm Length: 8.8″ / 223.6mm
  • Stylus Pressure Range: 0 to 4g
  • Supported Cartridge Weight: 3.5 to 6.0g
  • Overhang: 18.6mm
  • Anti-skating Adjustment: Supported
• Cartridge:
  • Type: MM type (Audio-Technica AT-95E)
  • Stylus Construction: Bonded Diamond
  • Frequency Response: 20Hz to 20kHz
  • Channel Separation: >18dB
  • Channel Balance: 2.5dB
  • Vertical Tracking Angle: 20 degrees
  • Supported Load Impedance: 47k ohms
  • Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
  • Stylus Pressure: 2.0g +/–0.5g
  • Cartridge Weight: 5.7g +/–0.5g
  • Head-shell Weight: 11g (including Screws, Nuts and Wires)
• General:
  • Analog Output Connector: RCA Pin jack (Gold-plated)
  • Power: AC 100 to 240V, 50/60Hz
  • Power Consumption: 1.5W (less than 0.5W at Standby)

NOT AVAILABLE TO BE SHIPPED OUTSIDE OF NEW ZEALAND